CCMCY - P/N 887076 9040I/9050I DISPERSANT PAK
- MSDS: CCMCY
- Manufacturer: RICOH CO LTD
- Product Name: P/N 887076 9040I/9050I DISPERSANT PAK
- National Stock Number: 6850-01-390-1345
Product Identification
Product ID:P/N 887076 9040I/9050I DISPERSANT PAK
MSDS Date:09/07/1994
FSC:6850
NIIN:01-390-1345
MSDS Number: CCMCY
Responsible Party
WEST CALDWELL, NJ 07006-6304
US
Emergency Phone: 800-336-6737
Info Phone: 201-882-2000, 800-336-6737
Cage: 2Z665
Contractor
Telephone: 203-967-5000
Cage: 29382
Ingredients
NAPHTHOL SPIRITS OR MINERAL SPIRITS OR HYDROTREATED NAPHTHA
CAS: 64475-85-0
RTECS: PY8240000
Fraction By Weight: 100%
Hazards
LD50 LC50 Mixture:ORAL LD50 (RAT) IS >10000 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EXPOSURE MAY CAUSE SLIGHT SKIN
AND EYE IRRITATION. INHALATION MAY CAUSE RESPIRATORY IRRITATION,
CNS EFFECTS. NO DATA FOUND FOR INGESTION HAZARDS. CHRONIC: HEALTH
STUDIES HAVE SHOWN THAT MANY PE TROLEUM HYDROCARBONS AND SYNTHETIC
LUBRICANTS POSE HUMAN HEALTH RISKS WHICH VARY FORM PERSON TO
PERSON.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:EYES-IRRITATION. SKIN-IRRITATION,
INHALED-RESPIRATORY IRRITATION, DIZZINESS, HEADACHES, ANESTHETIC,
OTHER CNS EFFECTS. INGESTED-NO INFORMATION FOUND.
Medical Cond Aggravated by Exposure:NOT APPLICABLE.
First Aid
First Aid:EYES-FLUSH WITH WATER FOR 15 MINUTES OR UNTIL IRRITATION
SUBSIDES. SKIN-REMOVE CONTAMINATED CLOTHES. WASH WITH MILD SOAP &
WATER. INHALED-REMOVE TO FRESH AIR. ADMINISTER OXYGEN OR ARTIFICIAL
RESPIRATI ON AS NEEDED. CALL A PHYSICIAN IMMEDIATELY. INGESTED-DO
NOT INDUCE VOMITING! CALL A PHYSICIAN IMMEDIATELY.
Fire Fighting
Flash Point Method:TCC
Flash Point:120F,49C
Lower Limits:0.7
Upper Limits:7.0
Extinguishing Media:WATER SPRAY (FOG), CARBON DIOXIDE, DRY CHEMICAL,
FOAM.
Fire Fighting Procedures:USE STANDARD FIRE-FIGTING METHODS FOR
PETROLEUM BASED LIQUIDS. WEAR SELF-CONTAINED BREATHING APPARATUS
AND FULL FIRE FIGHTER'S PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:DO NOT STORE OR MIX WITH STRONG OXIDIZING
AGENTS.
Accidental Release
Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. KEEP PEOPLE
AWAY. RECOVER FREE PRODUCT. ADD ABSORBENT TO SPILL AREA. VENTILATE
CONFINED AREA. MINIMIZE CONTACT & BREATHING OF MIST/VAPORS. KEEP
OUT OF SEWERS/WATER C OURSES; ADVISE AUTHORITIES IF ENTERS ORMAY
ENTER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:CAUTION-COMBUSTIBLE LIQUID! KEEP AWAY
FROM SOURCES OF IGNITION. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:EMPTY CONTAINERS RETAIN RESIDUE AND CAN BE DANGEROUS.
TO AVOID THE RISK OF EXPLOSION, DO NOT PRESSURIZE OR EXPOSE EMPTY
CONTAINERS TO HEAT, FLAME, SPARKS OR OTHER SOURCES OF IGNITION.
Exposure Controls
Respiratory Protection:NONE NORMALLY REQUIRED.
Ventilation:ADEQUATE GENERAL VENTILATION.
Protective Gloves:NONE NORMALLY REQUIRED.
Eye Protection:NONE NORMALLY REQUIRED.
Other Protective Equipment:NONE NORMALLY REQUIRED.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
MINIMIZE BREATHING OF VAPOR/MIST. AVOID PROLONGED/REPEATED SKIN
CONTACT. NOTE: SAVAN PRODUCT IDENTITY: PRODUCT CODE-4327, SAVIN
BLACK DISPERSANT TYPE L2, 9040I/9050I DISPERSANT PAK. MSDS
PRESENTED BY CAGE 29382 FOR CONTRACT NUMBER SP0450-97-MM394.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:336F,169C
Vapor Pres:<10
Vapor Density:>5
Spec Gravity:0.76
Evaporation Rate & Reference:0.1 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, WATER-WHITE LIQUID; FAINT PETROLEUM
HYDROCARBON ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS SUCH AS LIQUID CHLORINE OR CONCENTRATED OXYGEN.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:CARBON MONOXIDE AND OTHER
DECOMPOSITION PRODUCTS IN THE CASE OF INCOMPLETE COMBUSTION.
Conditions to Avoid Polymerization:WILL NOT OCCUR. NOT APPLICABLE.
Disposal
Waste Disposal Methods:WASTE LIQUID SHOULD BE DISPOSED OF IN AN
ENVIRONMENTALLY SAFE MANNER & IAW LOCAL, STATE AND FEDERAL
REGULATIONS. DISPOSAL REGULATIONS VARY FORM LOCALITY TO LOCALITY,
THEREFORE; CONSULT YOUR LOCAL OFFI CE OF THE EPA TO DETERMINE
PROPER DISPOSAL METHOD.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.